Big Dreamer range of Horizontal Shaft Impact Crusher is state of the art Equipment manufactured as per International Standards using high quality raw material. The Crusher is designed to Crush in two or three stages for minimum wear and tear of parts; the incoming feed first strikes the blow bars on the rotor and is then impacted on the primary curtain.
When the material is reduced to a stage where it can pass the primary curtain, it is then impacted on the secondary curtains where the final sizing of the finish product is acquired by the setting of gap. Grinding stage can also be fitted so that maximum fines can be achieved in just a single pass.
The scientifically designed Big Dreamer Horizontal Shaft Impactors reduce your Crushing stages due to their high performance, which not only saves your capital cost but has a lowering effect on energy charges.
The current and future operating conditions are getting increasingly stringent, and the answer is Big Dreamer Horizontal Shaft Impactor. The best performance from a Horizontal Shaft can be achieved only with the right and optimized Machine layout, a perfectly designed Crushing chamber, specific rotors and liners.
The proper combination of Big Dreamer’s large feed opening, high reduction ratio, high capacity, low investment and operating costs can multiply your profitability many fold.
Horizontal Shaft Impact Crusher with adjustable curtains is suitable for Crushing medium and hard Stones for the production of asphalt, sand and concrete aggregate.
Specifications | 5064 | 5048 | 4242 T | 4242 S | 4230 S | 3432 T | 3432 S |
---|---|---|---|---|---|---|---|
Maximum Feed Opening | 43 1/4″ X 64 3/4″ 1099mm X 1645mm |
43 1/4″ X 48 3/4″ 1099mm X 1238mm |
8″ X 40″ 203mm X 1016mm |
17″ X 42″ 450mm X 1066mm |
19.6″ X 37.4″ 500mm X 950mm |
8.6″ X 38″ 220mm X 965mm |
11″ X 38″ 300mm X 965mm |
Discharge Opening | 65″ X 64″ 1660mm X 1645mm |
65″ X 48″ 1660mm X 1230mm |
40″ X 60″ 1016mm X 1524mm |
46″ X 58″ 1186mm X 1492mm |
10.2″ X 13.7″ 260mm X 350mm |
35″ X 47″ 900mm X 1200mm |
38″ X 35″ 970mm X 907mm |
Maximum Feed Size | 12″ - 22″ 304mm - 558mm |
12″ - 22″ 304mm - 560mm |
5″ 125 |
8″ - 10″ 203mm - 254mm |
8″ 203mm |
3″ 76mm |
5″ 127mm |
Capacity | 250 - 400 | 150 -300 | 70 - 150 | 80 - 150 | 75 - 120 | 40 - 70 | 40 - 70 |
Power | 300 ~ 400 (224 - 298 Kw) |
250 ~ 300 (186 - 226 Kw) |
150 ~ 200 (111 - 149 Kw) |
125 ~ 150 (93 - 111 Kw) |
75 ~ 100 (56 - 74 Kw) |
50 ~ 60 (37 - 44 Kw) |
50 ~ 60 (37 - 44 Kw) |
Approximate Weight | 18500 Kg | 15500 Kg | 8500 Kg | 14000 Kg | 9000 Kg | 5000 Kg | 6000 Kg |